KEYENCE CA-DRM10X Multi-spectral lighting (100 mm)

Type

Multi-Spectrum Lighting

Illumination method

Ring illumination (with support for optional CA-DRM (DA) Series dome attachment and CA-DRM (PA) Series polarisation attachment^*1)
Multi-Spectrum lighting / LumiTrax lighting / Normal lighting (single-colour lighting in all directions)^*2
Constant current control mode (1,024-step digital gradation: With CA-DC60E connected / Adjustable per wavelength^*3)

Response speed

1 ms or less

LED

Peak wavelength

Ultraviolet: 405 nm / Blue: 457 nm / Green: 527 nm / Orange: 600 nm / Red: 660 nm
Far red: 730 nm / Infrared: 860 nm / White: 600 nm (All values approximate)

Controller connection

Dedicated cable (3 m/5 m/10 m), Max. 30 m (with extension cables^*4)

I/F input

12-pole connector (dedicated cable)

Power consumption

71.0 W (during normal light emission)

Environmental resistance

Ambient temperature

0 to 40 °C

Relative humidity

65%RH or less (No condensation)

Weight

Approx. 600 g (With dome attachment: Approx. 820 g /With polarisation attachment: Approx. 810 g)

^*1 The UV and IR wavelengths cannot be used when the polarisation attachment is attached.
^*2 Continuous lighting can only be set during normal lighting when brightness value control is set to ON.
^*3 Simultaneous lighting of multiple colours is not supported.
^*4 Connection of up to two dedicated extension cables is allowed.