SAKAGUCHI
Watrow thermocouple connector
Standard connector
Specifications:


| Thermocoupletype
 | Heat-resistant temperature(℃)
 | ASTM E230/ANSIcolor code
 | Pin dimension(mm)
 | Product code | 
| Plug | Jack | 
| K(CA) | 215 | ■Yellow | Interval: 11.1+ Diameter: φ3.97
 - Diameter: φ4.76
 | ― | 901K | 
| J (IC) | 215 | ■Black | 900J | 901J | 
| T (CC) | 215 | ■Blue | 900T | 901T | 
| R(Pt-13% Rh/Pt) | 215 | ■Green | 900R | 901R | 
| N(NiCr-NiSi)※ | 215 | ■Orange | 900N | 901N | 
※Sales will end as soon as the stock runs out.
 To the top of this page
To the top of this page
Quicky connector
When installing the compensation conductor, there is no need to remove the cap or wrap the wire around the screw of the terminal part.
Just insert the bare wire into the plug or jack and tighten the screw to complete the installation.
※The dimensions of the cookie connector are the same as the standard connector.
| 
 | 
 | 
 | 
 | 
 | 
| Loosen the 12 screws with a screwdriver in advance. | 
 | 2 Snee the compensation lead and insert it into the connector. | 
 | Tighten the 32 terminal screws. | 
| 
 | 
 | 
 | 
 | 
 | 
| 
 | 
 | Simply insert the bare thermocouple wire into the washer at the connection part and tighten it.Never wrap the line around the screw.
 | 
| Thermocoupletype
 | Heat-resistant temperature(℃)
 | ASTM E230/ANSIcolor code
 | Pin dimension(mm)
 | Product code | 
| Plug | Jack | 
| K(CA) | 215 | ■Yellow | Interval: 11.1+ Diameter: φ3.97
 - Diameter: φ4.76
 | 916K | 917K | 
| J (IC) | 215 | ■Black | 916J | 917J | 
| T (CC) | 215 | ■Blue | 916T | 917T | 
 To the top of this page
To the top of this page
Miniature connector


| Thermocoupletype
 | Heat-resistant temperature(℃)
 | ASTM E230/ANSIcolor code
 | Product code | 
| Plug | Jack | 
| K(CA) | 200 | ■Yellow | MCM-K | MCF-K | 
| J (IC) | 200 | ■Black | MCM-J | MCF-J | 
| T (CC) | 200 | ■Blue | MCM-T | MCF-T | 
| R(Pt-13% Rh/Pt) | 200 | ■Green | MCM-R | MCF-R | 
 To the top of this page
To the top of this page
High temperature ceramic connector


| Thermocoupletype
 | ASTM E230/ANSIcolor code
 | Pin dimension(mm)
 | Product code | 
| Plug | Jack | 
| K(CA) | ■Yellow | Interval: 11.1+ Diameter: φ3.97
 - Diameter: φ4.78
 | 912K | ― | 
| J (IC) | ■Black | 912J | 913J | 
| R(Pt-13% Rh/Pt) | ■Green | 912R | 913R | 
※Sales will end as soon as the stock runs out.