KYOWA
EDB-41B
Battery Unit for Instantaneous Power Failure
Specifications:
| Applicable EDX | EDX-100A-1(H), EDX-100A-2(H), EDX-100A-4(H), EDX-200A-2H, EDX-200A-4H | 
| Built-in Batteries | Battery type: Nickel-Metal Hydride (Ni-MH) batteryNominal capacity: 730 mAh, nominal voltage: 12 V
 | 
| External Power Supply Input | 11 V to 18 VDC[DC IN] connector type: RM12BRD-4PH (HIROSE made)
 DC power supply, AC adapter (Optional) for EDX-100A, or AC
 adapter (Optional) for EDX-200A is used
 | 
| Power Supply Output | External power voltage when using external power driveApprox. 11 to 15 V when using this units drive (In instantaneous stop)
 [DC OUT] terminal model: RM12BRD-4S (Hirose)
 When operated on external power supply:
 Voltage of the external power supply
 When operated on the EDB-41B (During instantaneous power failure):
 Approximately 11 to 15 V
 [DC OUT] connector type: RM12BRD-4S (HIROSE made)
 | 
| Charging Method | Automatically starts charging the battery by connecting theexternal power supply. (Battery charging period: Max. 3.5 hours)
 Starts discharging by pressing the [REFRESH] button.
 (Refresh period: Max. 6.5 hours)
 | 
| Indicator | [BATTERY LEVEL] LED (With [CHECK] button turned ON.)Remaining capacity of the built-in battery is 10% or more:
 Lights up green
 Remaining capacity of the built-in battery is 10% or less:
 Lights up red
 [CHARGE] LED
 During charging----------ON green
 During discharging------ON orange
 Charging complete------OFF
 | 
| Buzzer | During instantaneous power supply, alarm buzzer is issued. | 
| Operating Temperature | 0 to 50°C (However, when charging and refreshing: 0 to 30°C) | 
| Operating Humidity | 20 to 90% (Non-condensing) | 
| Storage Temperature | -20 to 50°C | 
| Vibration Resistance | ±29.42 m/s2 (3 G), 5 to 55 Hz (When operated)±49.03 m/s2 (5 G), 5 to 55 Hz (When not operated)
 | 
| Impact Resistance | 196.10 m/s2 (20 G), 11 ms. | 
| Dimensions | 25 W x 132.5 H x 255 D mm (Excluding protrusions) | 
| Weight | Approx. 500 g | 
| Backup Time (Reference value) | Approx. 30 minutesWhen 1 CDV-40B card (8 CHs) is installed to the
 EDX-100A-1(H) and full loaded
 Approx. 15 minutes
 When 2 CDV-40B cards (16 CHs) are installed to the
 EDX-100A-2(H) and full loaded
 Approx. 5 minutes
 When 4 CDV-40B cards (32 CHs) are installed to the
 EDX-100A-4(H) and full loaded
 Approx. 15 minutes
 When 2 CDV-40B cards (16 CHs) are installed to the
 EDX-200A-2H and full loaded
 Approx. 5 minutes
 When 4 CDV-40B cards (32 CHs) are installed to the
 EDX-200A-4H and full loaded
 * When built-in battery is fully charged and ambient
 temperature is 20 to 30°C
 |